The New Alber Cellcorder CRT-300 at a Glance - Lightweight, stylish, rugged and durable. Special features include new user-friendly operation, memory card, modem, graphical reflective LCD display for better contrast, and new cables and clamps.

Accurate Data in a Fraction of Normal Test Time - The intelligent, lightweight Cellcorder cell resistance tester displays and records cell float voltage, internal cell resistance, and intercell connection resistance. Using a compatible hydrometer, you may automatically transfer data, such as specific gravity and temperature, using the IR port.

Use the Cellcorder on a single cell or multicell modules. Data is stored using a memory card that allows virtually an unlimited amount of data storage. The memory card, IR port, or internal modem transfer readings to a PC for analysis and report generation.

The high contrast, 128 x 64 pixel, backlit graphical display shows menus and test results. A fully charged Cellcorder can test for seven hours, and isolated operation helps ensure safety and makes the Cellcorder easy to move around. Recharge power is supplied by a wall plug adapter.

System Features

Float Voltage Readings - The Cellcorder measures the voltage applied during full float operation. The voltage range covers all cells or modules up to 20 volts. Cell or module reading accuracy is to four full digits.

Internal Cell Resistance - Using a patented process, the Cellcorder applies a momentary load and calculates internal cell resistance by determining instantaneous voltage drop and load current. Cellcorder algorithms make this measurement possible on cells floating on-line or off-line.

Intercell Resistance - The Cellcorder measures the resistance between two electrically connected cell terminals. The measurement consists of connector resistance and contact resistance at the points of connection to the cell terminals.

Auto Ranging - The Cellcorder automatically selects the correct voltage range, load resistor, and time for a test.

Data Extraction and Analysis - After testing is complete, plug the memory card into the reader to extract data to the PC, or transfer data via IR interface or modem. The Cellcorder trending software analyzes test data, displays results in graph or tabulated formats, and saves and prints reports. It also exports report files in ASCII, Excel® or comma-delimited format so you can use off-the-shelf programs to generate customized reports.

Cellcorder Advantages

Low Cost - The Alber Cellcorder replaces three instruments that individually cost as much as or more than this one instrument. Significant savings result from taking more readings in less time and analyzing data more rapidly.

Multicell Capability -The Cellcorder provides readings on either single cells or multicell modules.

Reliable Readings - The Cellcorder displays superior performance even in high noise environments - without the need to disconnect the battery from service. The instrument uses up to a 60 amp DC load (on 2V cells) to calculate internal cell resistance and intercell resistance. Circuitry rejects the 50Hz/60Hz ripple often troublesome to AC-based impedance and conductance meters.

The Cellcorder CRT-300 comes complete with an 8M memory card, USB port memory card reader, resistance test leads, voltage test leads, carrying case, AC charger, and data trending and analysis software. An optional printer is available.